Loading... Please wait...

Add to Wish List

Click the button below to add the B & G Broadband 4G Radar Kit to your wish list.

You Recently Viewed...

Our Newsletter

B & G Broadband 4G Radar Kit

  • B & G Broadband 4G Radar Kit
B & G 4G
Calculated at checkout
Bookmark and Share

Product Description

Product Description

B & G G4™ Radar Specifications:

* Range: True 32 NM (36nm display) 50% more than 3G and 2X BR24
* Closes target to Radar: 2 Meters
* Safe Distance from Dome: -0- Meters (OK to Touch)
* Warm up Time: -0- Seconds
* Operating / Standby Power: 21W dual range/2.9W
* Scanner rotation speed: 48 RPM
* Interface - radar data: Ethernet
* Advanced Use modes: Offshore / Harbor

Unique 4G™ Features:

* Designed for optimal target separation, Broadband 4G Radar is the world’s first dome radar to use Beam Sharpening, which significantly improves azimuth resolution — the effective horizontal beam width of the radar signal. The result is a resolution that is equivalent to a 3.5-foot, open-array radar
* Range: Up to 50% more range and target detection ability than 3G ; 2X more than BR24
* Same proven short range performance as 3G and BR24
* Azimuth Resolution: Up to 2X better than 3G / BR24 using Target Separation Mode control – same as 3.5’ Open array
* Dual Range: Provides totally independent radar display ranges and controls - including dual MARPA with (10) Targets on each side (20 total)
  -Note: MFD model dependent High Speed Up to 48 RPM (Note: mode and MFD model dependent)
* Directional Sidelobe Reduction: Advanced signal processing allows you to see small targets better next to large targets such as ships and bridges
* InstantOn™: About 6 seconds max from cold boot start (faster than display boot time), instantaneous from standby.
  -Faster than 3G/BR24
  -Safety feature: switch the unit on and use it
  -No need to wait for 2-3 minutes or more for conventional pulse radar to warm up
  -2 minutes is a long time if you are concerned about potential collision
* Low power draw: 21 Watts operating (dual range)/2.9 watts in standby, vs. 25/30w operating and ~10/15w in standby for 2/4kW pulse radars
  -Conserves power for smaller vessels and sailboats.
  -Beneficial for complex installs on mid-size center consoles
  -20-40% Savings in operating mode vs. 2/4 kW pulse radars.
* Low electromagnetic emissions 0.165 watts (at antenna port) vs. 1 watt for a cell phone
  -Easier to install and safer to use
  -Flexible mounting options with Safe operation on smaller boats
  -Can run in anchorages and marinas
* Connectivity: Connects to range of Navico multi-function displays via Ethernet
  -Same as 3G/BR24
  -Easier to install with small diameter connectors and thinner/lighter cabling

General Specifications:

* Input Power (At end of Radar Cable):
  -9-31.2 Volts DC (12 /24 Volt Systems)
  -Reverse Polarity Protections
  -Minimum Start-up Voltage 10.8 Volts
* Power Consumption: (with 10 meter cable)
  -20 watts @ 13.8 Volts DC (21 watts in Dual Range Mode)
  -Standby Mode: 2.9 Watts @ 13.8 Volts Dc
* Outside Dimensions: 11.02" High x 19.28" Diameter

Kit Includes:

* 000-10417-001  Wahoo Premium radar unit with 2 x B&G decal
* AA010212  Cable, External, BB RADAR - 20m (66ft)
* AA010189  Interface Box, BB radar, N2K, RI10
* 000-0127-51  Cable,ETHEXT-6YL 1.82 m (6ft)
* 988-10113-002  Installation Manual
* 988-10122-001  Mounting Template
* 988-10120-001  Limited warranty card, B&G
* Hardware Mounting Kit
* Scanstrut Mount Brochure

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Customers Who Viewed This Product Also Viewed